HUSKEY SPECIALTY LUBRICANTS

A multi-service, non-melting, waterproof grease fortified with PTFE.  It is designed specifically to lubricate, seal out water, and resist chemical attack under the most demanding conditions.  With its excellent film strength and extreme pressure qualities, forms a tough durable film of lubrication that prevents metal to metal contact. This is a pure synthetic based lubricant that is NSF/U.S.D.A. H-1 Registered, KOSHER approved and HALAL certified. 

A versatile, pure synthetic, completely waterproof grease containing PTFE. 

It is formulated to seal out water and lubricate under the most adverse conditions.  With its highly adhesive qualities and high load-carrying characteristics forms a tough durable film of lubrication that prevents metal-to-metal contact even under severe shock loads. This is also NSF/U.S.D.A. H-1 Registered, KOSHER approved and HALAL certified.

Blend of the finest quality USA grown natural seed oils available then treated with the most effective anti-oxidants, extreme pressure, anti-wear and anti-corrosion additives. PTFE is added to further enhance load capacity, and reduce friction. Is readily biodegradable and contains no ozone depleting chemicals, SARA Title 313 chemicals, heavy metals, greenhouse gases, chlorine, phenols, VOC’s or Prop. 65 chemicals. It is also NSF/U.S.D.A. H-1 Registered, KOSHER approved and HALAL certified. 

 A versatile, premium quality, synthetic grease fortified with PTFE. Blended completely with pure synthetic base oils, additives and shear stable thickeners to provide maximum equipment protection in extremely high and low temperatures (Operating Range -75° to over 500°F), also NSF/ U.S.D.A. H-1 Registered, KOSHER approved and HALAL certified. 

 An environmentally responsible, non-toxic, pure synthetic, waterproof lubricant formulated to provide maximum parts protection in adverse conditions of extreme loads, high water washout and chemicals. This is NSF/U.S.D.A. H-1 Registered,  KOSHER approved and HALAL certified. It does not contain any lead, chlorine, phosphorous, sulphur, chromates, antimony, benzene, free metallic or other potentially hazardous ingredients that may harm the environment. 

A multi-purpose semi-synthetic, non melting grease designed for general lubrication in food processing facilities.  It is truly a multi-service maintenance grease. Due to its excellent film forming characteristics and anti-wear qualities it will stay on the metal surfaces much longer than conventional greases on the market today, resulting in longer lasting lubricity, with fewer lubrication intervals.Is white, odorless, tasteless and is NSF/U.S.D.A. H-1 Registered,  KOSHER approved and HALAL certified. 

A non-hardening and non-carbonizing silicone lubricant with excellent dielectric properties, plus both physical and thermal stability. It is insoluble in water, methanol, ethanol, dilute acids and caustics, vegetable and mineral oils, glycol and glycerin. A USDA/NSF H-1 Registration,  KOSHER approved and HALAL certified. 

Heavy duty extreme pressure oils formulated from the highest quality selected synthetic base oils and additives available.  These high quality 100% synthetic oils have been designed to give extra protection in high and low temperature applications. These are NSF H-2 Registered for use in food processing plants. .

 A blend of the finest quality, pure synthetic oils available and treated with the most effective extreme pressure, corrosion inhibitors, anti-oxidant, anti-foam and anti-wear additives. This unique combination provides maximum equipment protection in extremely high and low temperature applications. Is NSF/U.S.D.A. H-1 Registered ,  KOSHER approved and HALAL certified. 

 A unique high-temperature (upto 274 C), extreme pressure, non-melting premium quality grease designed for very heavy-duty service in adverse environments. 

It is a blend of high quality petroleum oil and special synthetic polymers which work together to form an extremely water-resistant, tough lubricating film that prevents water washout and metal-to-metal contact even under extreme pressure or shock loading. Contains no fillers or clay thickeners. The distinctive red color makes it easy to identify during and after lubrication. 

 This unique new, high performance, multi-purpose grease is based on advanced polyurea technology.  It is formulated from pure petroleum base oils then fortified with extreme pressure additives and rust and oxidation inhibitors. This grease gives longer bearing life under high speed, high temperature (upto 245 C) and high water applications than most other widely used anti friction bearing greases.  The distinctive Green color makes it easy to identify during and after lubrication. 

Formulated from the highest quality petroleum base stocks coupled with the newest additives available, to help produce the high temperature (capable to withstand upto 308 C) characteristics usually associated with expensive synthetic based grease. 

This unique blend, together with its shear stable thickening system, provides the maximum protection against friction, wear and corrosion. It is not just another “no-melt” grease and does not contain any moly, graphite or clay fillers. 

 Blended from the highest quality selected paraffin petroleum oils, polymers and shear stable synthetic thickeners available & treated with the latest chemical E.P. additives, rust and oxidation inhibitors to provide lasting protection against friction, wear and corrosion. Its Polymer base helps the grease to stay put and seal out dirt, water and other contaminants. Capable of withstanding temperatures of upto 274 C

 A premium quality synthetic high temperature grease fortified with Molybdenum Di-sulfide (Moly). 

Blended completely from pure synthetic base oils and thickeners to provide extended service life and wide temperature ranges. Coupled with the most modern extreme pressure and anti-wear additives it proves an exceptional lubricant for use in industry today. Operating temperature range: 

Base Grease -38 C to 260 C with dry film lubrication to 455 C. 

 A unique high-temperature, extreme pressure, non-melting, non-caking grease designed for extreme service applications. Blended from pure synthetic base oils and thickeners then coupled with the most modern extreme pressure and anti-wear additives to provide a tough, durable lubricating film that protects against metal to metal contact. It is designed to withstand temperatures from -34 C to 277 C with 

intermittent usage upto 318 C. 

 Click the button below to have a look at the complete range of high temperature grease products

 A blend of the finest quality pure synthetic base oil and additives available and is formulated with Molybdenum Di-sulfide (Moly). Superior performance capabilities are derived from special properties of the synthetic base oil coupled with extreme pressure and anti-wear additives. 

Truly a multi-service lubricant for extended service under extremely high and low temperature conditions from -37 C to 260 C with dry film lubrication to 455 C. 

 Formulated from selected blend of high viscosity index synthetic esters and premium additives coupled with HUSKEY’S newest proprietary extreme pressure additive which forms a tough durable film of protection from friction, wear and corrosion over a wide temperature range (upto 312 C). This synergistic blend produces self-cleaning properties, friction reduction, anti-wear, copper corrosion protection, low oil and power consumption, no throw-off at high speeds and minimum build-up of deposits. 

  A blend of highest quality selected paraffin base oils coupled with the finest rust and oxidation resistant additives available. 

This unique combination produces an exceptional lubricating oil with excellent thermal stability and low carbon forming characteristics. Formulated with only high-viscosity index oils to minimize viscosity changes during high and low temperature variations. These oils have extremely high film strength. Compounded to meet service requirements of Denison HF-2 and Cincinnati Milicrons high temperature heat stability test. 

 A combination of the finest base oil stocks, additives and synthetic thickeners available to provide a truly multi-service, friction reducing, non-melting grease with unmatched protection in normal and severe service applications. Forms a tough durable film of protection from friction, wear and corrosion over a wider temperature range (-29 C to 282 C). 

The unique formulation provides superior adhesion to metal surfaces that does not easily wash off, run out or separate even under adverse conditions of water, steam or dilute chemicals.

 A premium quality, multi-purpose grease containing a blend of molybdenum di-sulfide (Moly) and special lubricating solids. 

This unique combination of solid lubricants offers superior performance compared with pure molybdenum di-sulfide greases. 

This optimum percentage of lubricating solids is homogenized into a blend of the finest quality base oils and thickeners available. Treated with the most modern additives to provide lasting protection against water, extreme pressure, temperature, fretting and oscillating conditions. 

A premium, all-purpose, extreme anti-wear grease formulated from the highest quality petroleum base stocks and a shear stable lithium thickener. Treated with the latest additives, they provide lasting protection against wear, rust, and oxidation. This grease is extremely water resistant and it forms a tough, durable film against moisture and prevents metal to metal contact even under extreme loads and high or low temperatures. Operating temperature from -18 C. to 150 C .

Is a new generation of calcium sulfonate grease that is characterized by its spectacular mechanical stability. It carries a very high load rating, excellent water resistance, with oxidation and corrosion stability. This is truly a heavy duty calcium sulfonate grease with its wide operating  temperature range of -23 C to 204 C.  The product is environmentally friendly because it contains no heavy metals or any other harmful undesirable additives.

A premium quality, multi-purpose, non-soap grease. It gives better lubrication in more applications, wet or dry, over a wider temperature range (-40 C to 230 C), and for longer periods of time than ordinary soap-base greases. Because of its excellent stability and its E.P. characteristics, it will remain on all metal and bearing surfaces longer than most ordinary greases. Formulated not to melt or run out of bearings even at higher temperatures. The distinctive green color makes it easy to identify during and after lubrication.

A premium quality, all-purpose, non-melting grease. It is a blend of the highest quality base oils and thickeners available. Treated with state of the art additives, they provide lasting protection against rust, corrosion and oxidation. The most important built-in feature is the tenacious quality of its polymer additives. Such a feature helps produce more uniform friction drag, cushions shock loading and minimizes wear. 

With its “cling to” ability, the grease will stay on the metal surface much longer than most conventional greases on the market today, resulting in longer-lasting lubricity, with fewer lubrication intervals. 

 A  versatile, multi-purpose grease containing powdered PTFE. It is blended from the highest quality selected oils and synthetic bases available. It is compounded by special processes and techniques to guarantee thorough dispersion and homogenization of the PTFE lubricating solids.  A highly water resistant, high temperature (upto 274 C) adhesive lubricant with the unique characteristics of PTFE. Rust and oxidation inhibiting characteristics are maximized to afford complete rust protection and long life of the lubricant.  

A high performance, low temperature grease designed for high speeds and moderate loads. It is blended from the highest quality petroleum base stocks and selectively treated with rust, oxidation and anti-wear additives coupled with an extremely shear stable thickener system. 

 Meets the Requirements of Mil –PRF-10924 C&D and Ford WSB-M1C163-D. 

 Heavy duty, multi-functional, anti-wear oils designed to meet the demanding needs of a wide variety of modern industrial equipment. They have been formulated from the highest quality refined paraffin base stocks and latest additives to provide excellent friction reducing properties coupled with rust, oxidation and foaming protection, thus ensuring longer service life in a wide variety of applications. These are non-detergent oils formulated with special additives to condition seals and reduce leaking. It is also a non-detergent product. . 

Click the button below and let us know. 

We are eager to cater to your requirements.

 A heavy-duty industrial anti-seize and lubricating paste containing very finely divided metallic particles in a special no-melt semi-synthetic carrier. Leaves a protective film that seals and protects metal parts even under the most extreme conditions of heat, pressure, steam and saltwater exposure. 

Temperature resistance upto +1200 C.

 A heavy-duty, economical industrial anti-seize and lubricating paste containing a balanced blend of copper and graphite powder in a no-melt petroleum base grease. Leaves a protective film that protects metal parts and fasteners against extreme conditions of steam, chemicals, water and high temperatures to +1200 C. 

 A heavy duty, multi-purpose extreme pressure lubricant and anti-seize compound designed to reduce seizing, galling, fretting and wear. A balanced blend of lubricating solids, including molybdenum di-sulfide, are dispersed in the product to assure superior performance during its full working life. Contains proprietary technology to prevent fretting wear. Rust and oxidation inhibiting characteristics have been maximized to afford complete rust protection and life of the lubricant. Temperature resistance upto +400 C